Ghost 2 Immobiliser Problems
It is designed to safeguard vehicles from hacking and key cloning, the Ghost 2 immobiliser is a discrete device that can be fitted without causing damage to your car. It stops your vehicle from starting unless you press an exact sequence of keys inside your vehicle, similar to the password of the phone.
Stop/Start
Ghost Immobilisers stop vehicles being stolen by blocking the engine from starting unless it receives the correct PIN code. This is done without modifications to the vehicle, and is totally undetectable to thieves. The unit communicates with the ECU via the CAN data bus to disable the vehicle. This system is very similar to the one automobile manufacturers have used in their cars for years however, the criminal cannot add a new key or use key relay technology to bypass it, as they can with factory fitted systems.
ghost immobiliser installation is compatible with any vehicle that has an engine, which includes motorhomes, vans, cars and caravans, as well as bikes. The same system can also be used on electric vehicles. It's a great alternative to steering wheel locks and wheel clamps that can be installed with little effort.
When the Ghost is armed it will block all buttons in your vehicle and stop the ignition from starting unless a PIN code has been entered before. This can be done via the Android or Apple mobile apps or by manually entering the code via your key fob. If the incorrect code is entered, the app will show an indicator light. The Ghost will then refuse to let the vehicle be started again. This is a great way to deter thieves. If the vehicle cannot be started and they are unable to get it started, they will leave.
The Ghost is a small weatherproof device that is able to be hidden in the most difficult to reach parts of your car. It is extremely easy to install with an average of 20-30 minutes for each vehicle. It is also very easy to remove should you decide to change your vehicle or give it away for service or valet parking. It is an TASSA (Tracking and Aftermarket Security Systems Association), insurance approved system, and is recognized by certain insurance companies. It also has a safe emergency Pin Code override and features a Service/Valet Mode that can be activated with the application's button or by using your key fob.
Disarm
Ghost immobilisers, unlike mechanical anti-theft devices that can be removed, are concealed in the car. They are nearly impossible to bypass or hack and, even if they are discovered, thieves cannot start the engine. This is because ghost immobilisers prevent key blocking, signal jamming, and device spoofing - methods that are used frequently by thieves to gain access to vehicles with standard immobilisers.
An immobiliser operates by sending an electronic code to the ECU (electronic control unit). If a wrong code is received, the vehicle will not start since the engine won't fire up. It is possible to disable a ghost immobiliser by using the aid of a software program, however it's extremely time-consuming and difficult to accomplish this. Only an authorised installer can install and use the software.
The Ghost immobiliser, a tiny device, is hidden in the wiring loom of the vehicle. It is invisible to the naked eye once installed. It is not visible on diagnostic systems, there are no LED indicators, and it does not communicate with the engine through the OBD port. It communicates silently via the CAN data circuit.
The system will stop the vehicle from starting unless it receives a user defined PIN code sequence. The PIN code is entered via buttons on the steering wheel and door panels as well as the central console. This is a more secure method of protecting your vehicle as it does not require a key fob or remote control.
In addition to this Ghost has an option for service that can be activated through the application on your mobile phone. This lets you hand over your keys to someone else for service or valet parking, without having to enter an arm-disarm sequence.
You should never remove the system from your Ghost by yourself, regardless of whether it's in service mode. This could cause damage to your engine. It is best to contact an installer certified by TASSA who will safely and properly remove the system. Our latest GHOST immobilisers have a specific fingerprint QR sticker that is hidden in various parts of your vehicle. These are linked to our security register. In the event that the system is removed and then sold on the black market this will allow you to trace the owner of the system.
Anti-Hijack
Ghost Immobiliser 2 has a highly effective anti-hijack function. This system functions as a smart key and is among the most secure methods to ensure your car is safe from thieves. Whenever the ignition switch is switched to on, and the vehicle is stationary for a period of 30 seconds, the Ghost system will automatically stall the engine and switch the hazards lights on. This allows the driver or passengers enough time to press a security button (depending on the vehicle) before the system reactivates and the engine is once again allowed to begin.
The Ghost system, unlike other competitors, utilizes an electronic timer and controller which shuts down the fuel shut-off valve 14 after a set period of time. This happens regardless of whether the ignition remains on. The delay time frame must be sufficiently long to allow the victim of the vehicle to drive away from the site of the hijacking and a sufficient distance from the stalled vehicle before the system can be activated.
In addition to the standard CANbus immobiliser blocking capabilities of the Ghost, it has an extra security level that blocks common hacking techniques that are used to hack into modern cars such as relay attacks, key range extending and ECU swapping. This is because the Ghost system is completely silent and does not emit signals that could be picked up by a thief using code grabbing or RF scanning technology.
The Ghost system also has the option of a Service/Valet mode that allows your vehicle to be temporarily re-started and driven without the requirement of PIN codes. This is perfect if you are parking your vehicle and need to leave it for a brief period of time, for example, to store groceries in the boot, or open a garage door, etc. The system will then exit the service mode based upon the speed and duration, or via a simple PIN code input process. This gives you complete peace-of-mind that only YOU can drive your vehicle!
Keyless Entry
Many consumers are now seeking additional security measures due to the increasing trend of thefts from cars using contactless. This is especially relevant for those who have put in time or money to personalize their vehicle or own expensive vehicles. Immobilisers with add-ons are a great way to prevent this type of theft because they will stop your vehicle from starting until the correct pin code is entered along with your key fob.
Immobilisers are designed for various vehicle circuits, including ones which control starter motors and fuel pumps. They also can shut down the car alarm to draw attention to and frighten away any potential thieves.
These devices are directly connected to the engine control unit through the CAN data network and hinder thieves from gaining access to it by installing a new ECU or by using key programmers. The immobilisers are fitted in a discreet manner and leave no trace in your vehicle. They are also undetectable by sophisticated tools used by thieves.
The Ghost immobiliser is different from other systems that require the driver to wear an app or tag. Instead, you are able to choose your personal pin sequence by pressing a pattern on your door, steering panel, and centre console. The pin can be changed as frequently as you like, meaning it is as secure as a credit card and is even more difficult to hack because it requires at least 20 presses.
Ghost also offers Valet/Service mode, which allows you to disable it if you are going to surrender your vehicle to valet parking or service. This allows the system to function within certain parameters such as a 30 mph speed limit. It can then be reactivated with the original key or the corresponding entry code.
Installed by our certified installers, it is the most secure and efficient aftermarket CAN-immobiliser available. It is also fully certified by Thatcham for insurance purposes. The Ghost 2 immobiliser comes with six QR fingerprint labels as well as an ISR contact card with your unique QR codes along with a secure emergency code. All of these are kept in your wallet or purse.